Consult International Marine’s INTERTUF DATA SHEET brochure on NauticExpo. Page: 1/4. Intertuf Aluminium. A one pack, tar free vinyl anticorrosive which can be used at temperatures down to -5°C. Packaging: 20L. Documents. Interuf__eng. International Intertuff Vinyl Anticorrosive. A one pack, tar free vinyl anticorrosive which can be used at temperatures down to -5°C (23°F). As an anticorrosive.
|Genre:||Health and Food|
|Published (Last):||5 November 2010|
|PDF File Size:||19.15 Mb|
|ePub File Size:||9.87 Mb|
|Price:||Free* [*Free Regsitration Required]|
INTERTUF DATA SHEET – International Marine – PDF Catalogs | Documentation | Boating Brochures
In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation.
Use in accordance with the standard Worldwide Marine Specifications. Petersburg, Russia, phone: Recommended Tip Range 0. IntertufJVA aluminium must be specified as the first coat in an anticorrosive system. DO NOT thin more than allowed by local environmental legislation. Use International GTA only in exceptional circumstances. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions.
Products Marine Coatings Marine chemicals Marine lubricants. Use International GTA only in exceptional circumstances. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions. Weld seams and damaged areas should be prepared to the specified standard eg.
If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product. On split anticorrosive schemes, where Intertuf has weathered, please consult International Paint. Open the catalog to page 2. Take precautions to avoid skin and eye contact ie.
For blasted areas, the primer should be applied before oxidation occurs. Application by roller is recommended for small areas only. Consult your local International Paint representative for specific recommendations. Use in accordance with the standard Worldwide Marine Specifications. Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information.
Marine Coatings Marine chemicals Marine lubricants. This material is a one pack coating and should always be mixed thoroughly with a power agitator before application. DO NOT thin more than allowed by local environmental legislation. Apply in good weather. Where necessary, remove weld spatter and smooth weld seams and sharp edges.
Material should be filtered prior to use. All surfaces to be coated should be clean, dry and free from contamination. Thoroughly flush all equipment with International GTA Consult your International Paint representative for specific recommendations.
Long term testing is ongoing. Application by roller is recommended for small All unused material should be stored in tightly closed containers. Application by brush is recommended for small areas only. IntertufJVA aluminium must be specified as the first coat in an anticorrosive system.
Subject to reinspection thereafter. If oxidation has occurred between blasting and application of Intertufthe surface should be reblasted to the specified visual standard.
All surfaces to be coated should be clean, dry and free from contamination. Test performance results were obtained in a controlled laboratory environment and International Paint makes no claim that the exhibited published test results, or any other tests, accurately represent results found in all field environments. Unmixed material in closed containers should be maintained in protected storage in accordance with information given in the STORAGE Section of this data sheet.
Actual safety measures are dependant on application methods and work environment. Apply in good weather. Related Searches Marine epoxy filler International Marine antifouling International Marine epoxy primer International Marine anti-corrosion primer Zinc primer International Marine merchant ship antifouling International Marine merchant ship primer High-gloss coating Inteertuf Marine professional vessel antifouling International Marine professional vessel primer International Marine topcoat coating International Marine 23 antifouling Ballast primer International Marine two-component coating Tin-free antifouling Zinc coating International Marine epoxy coating Acrylic coating International Marine tank coating International Marine coating.
Technical and application data herein is for the purpose of establishing a general guideline of the coating application procedures. Open the catalog to page 4. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 intretuf cleaning.
Multiple coats may be required to achieve specified film thickness. These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances. Vinyl Anticorrosive Airless Spray Conventional Spray This material is a one pack coating and should always be mixed thoroughly with a power agitator before Not recommended.
VOC values are typical and are provided for guidance purposes only. Surface defects revealed intertug the blast cleaning process, should be ground, filled, or treated in the appropriate manner. Multiple coats may be required to achieve specified film thickness. Iintertuf the catalog to page 3. Vinyl Anticorrosive Optimum performance is achieved when Intertuf is applied over blasted steel. Application by brush is recommended for small areas only. Consult your International Paint representative for the system best suited for the surfaces to be protected.